Replacement Parts - Xinlehong Toys High Speed 9109 Manual De Instrucciones

5. Replacement parts

(1). Replace front wheel
. Press and hold the two-
①
sides of the button in the front
wheel behind .
. Pull down the front wheel;
②
. Replace the other
③
frontwheel.
(2). Replace the rear wheel
Pressing the center of the wheel;
Pull down the wheel;
②.
Replacementof wheel .
③.
②
①
6. Transmitter steering wheel
The steering wheel can be placed in the left or right side of the transmitter to adapt to the habits of the players .
(1). The transmitter power switch to "OFF" position . (Figure 1)
(2). Remove the steering wheel on it for your habits. According to the current settings , left/right wheel set switch
position corresponding to the steering wheel . (Figure 2)
7. Control the car
1. Put the steering wheel in the transmitter.
2. Transmitter and the frequency of the vehicle set:
(1). First set, the car and transmitter supply must be in 4 seconds at the same time open, let them check frequency
(Proofing, car and remote control power indicator will flash, when proofreading is completed, president of the power
indicator light); (Fig.1)
(2). If because not enough time and on the frequency,
to turn off the car and transmitter power, then please
repeat the first (1) point set of frequency.
NOTICE:
When the lack of the power of remote control cars and
transmitter , power indicator light flashes, this should
replace the battery or rechargeable battery pack to
recharge your batteries.
①
①.
Power switch
(Fig.1)
①
②
Left / right wheel
setting switch
(Fig.2)
Power switch
12
③
③
Power switch
(Fig.1)