Thermador P24WK Instrucciones De Instalación página 9

FIG. 9 Front - Bottom of Unit, See Detail B, Below
Product Rating
Label/Serial Tag
3"
Min.
36"
Power
Cord
Regulator (sup-
plied with unit)
Install horizontally,
See Detail B,
3-Prong grounding type
Below.
receptacle connected to
a properly grounded and
polarized electrical supply
rated at 120VAC, 10 Amps,
( or 15A*) Single Phase,
60 HZ.
Detail B – See FIG. 9, above
Suggested Regulator Installation
Installation Options
*See important note below
Installation Option 1. From Shut-off Valve
Manifold
3/4"
Regulator
Manifold
flex
adapter
3/4"
flex
3/4" flex
line
adapter
Installation Option 2. From Manifold
Regulator
3/4" Manifold
Street
nipple
Ell 3/4"
3/4" x 3/4" x 3"
Step 2: Cabinet Preparation
Threading compounds
must be resistant to
Propane Gas
P24WOK 1/2" NPT
3/4" flex line
gas flow
A manual valve must be
installed external to the
appliance, in an accessible
location from the front, for
the purpose of shutting off
the gas supply.
All Installer supplied parts must
conform to Local Codes.
Wall
gas flow
Shut-off
3/4"
Valve
nipple
3/4"
Shut-off
flex
Valve
line
gas flow
3/4" flex
3/4" flex
adapter
adapter
Note: The PC304 30" cooktop
includes an internal gas supply
regulator.
*15 Amp electrical supply
required for models PC364GE,
PC486GE, and PC484GGE.
GAS SUPPLY REGULATOR
3/4 "
NPT
Outlet
Make sure gas
regulator is horizontal
after installation
*IMPORTANT: For the PC304 model,
install the shut-off valve, flex line and fitting
only - NO regulator. The PC304 model
has an internal regulator. DO NOT IN-
STALL AN EXTERNAL REGULATOR
WITH THE PC304 MODEL.
7
Gas Flow
3/4 "
NPT
Inlet