Velleman CAMIP14n Guía Rápida página 5

1.
Tap Register.
5. Check both LED indicators.
If both are always on, tap
Yes.
7.3 Manual Network setup
You can configure the network setup manually as follows:
1.
Write down the IP address of your wireless router. You will need it later. To find the IP address,
proceed as follows:
V. 02 – 31/03/2014
CAMIP14n
2.
Fill in the information
needed and tap "Register".
6. Fill in your device's MAC
address (the address can
be found on the back or the
bottom of your device) and
tap Apply.
5
3.
Select your device type. For
a wireless camera, tap the
lower icon.
4.
Connect your camera as
shown on the screen and
tap Ready when the camera
is on.
7. A preview of your camera
appears. Check if the
camera is oriented the way
you want.
8.
Fill in a name for the
camera next to Device title
(for example: "Office").
9.
Tap Apply to finish.
©Velleman nv