Technical Data; Lithium-Ion - Hilti TE 6-A Li Manual De Instrucciones

Technical data

Voltage
Weight of machine
TE 6-A Li including B 36/2.4 Li-Ion battery
TE 6-A Li including B 36/2.6 Li-Ion battery
en
TE 6-A Li including B 36/3.3 Li-Ion battery
TE 6-A Li including B 36/2.4 NiCd battery
Dimensions (L×H×W)
Speed
Hammering speed
Single impact energy
Chuck
Drill bit dia. range in concrete
Drill bit dia. range in wood
Drill bit dia. range in metal
Dust-tight encapsulation and permanent lubrication (maintenance-free)
Technical data for the battery
(accessory TE 6-A Li)
Voltage
Battery capacity
Weight
Type of cell
No. of cells
Temperature monitoring
Deep discharge prevention
Right of technical changes reserved
Insert tools, accessories
Bit holder
Charger
Battery
The tool is designed for the following uses:
Use
Drilling in concrete, masonry and
natural stone
Setting anchors
Drilling in wood and metal
Screwdriving
Using hole saws in wood, plastic,
tiles and masonry
Drilling in snow, ice and hard
ground
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5071062 / 000 / 00
36 V
8.2 lbs (3.7 kg)
8.2 lbs (3.7 kg)
9.3 lbs (4.2 kg)
10.4 lbs (4.7 kg)
13"×8.9"×3.9" (330×215×90 mm)
890 r.p.m.
5,000 blows/min.
1.5 joules
TE-C Click
up to
up to
up to
B36 / 2.4 Li-Ion B36 / 2.6 Li-Ion B36 / 3.3 Li-Ion B36 / 2.4 NiCd
36 V 36 V
36 V x 2.4 Ah 36 V x 2.6 Ah
= 86.4 Wh = 93,6 Wh
2.6 lbs (1.17 kg) 2.6 lbs (1.17 kg) 3.5 lbs (1.6 kg)

Lithium-ion

Lithium-ion
10 10
NTC NTC
✓ ✓
for NiCd and NiMH batteries
for Li-ion batteries
for the TE 6-A Li
Required insert tool
Drill bit with TE-C connection end
Anchor setting tool with TE-C
connection end
Quick-release chuck or key-type
chuck
S-BHU 75 M SDS bit holder
Quick-release chuck or key-type
chuck
TE-C-EB ice drill bit
" (16 mm)
5 /
8
" (20 mm)
3 /
4
" (10 mm)
3 /
8
36 V
36 V x 3.3 Ah
= 118,4 Wh
Lithium-ion
30
NTC
✓
S-BH 50
TCU 7/36
C 7/36-ACS
C 4/36-ACS
B36 / 2.4 Li-Ion
B36 / 2.6 Li-Ion
B36 / 3.3 Li-Ion
B36 / 2.4 NiCd
Diameter range
Drilling in concrete:
"– " (4–16 mm) dia.
5 / 5 /
32 8
All Hilti anchors with TE-C setting
tools
Wood drill bits up to
dia.
Metal drill bits up to
TE-HS hole saws 1"–4
mm) dia.
"–1 " (28–35 mm) dia.
1 1 / 3 /
8 8
36 V
36 V x 2.4 Ah
= 86.4 Wh
4.6 lbs (2.08 kg)
Nickel-cadmium
30
NTC
" (20 mm)
3 /
4
" (10 mm) dia.
3 /
8
" (25–105
5 /
8