Philips HR1655 Manual Del Usuario página 11

2 To remove the paddle from the potato bar turn it clockwise (Fig. 13).
3 To detach the coupling unit from the potato bar turn it counterclockwise (Fig. 14).
Note: Always clean the potato bar immediately after use (see chapter 'Cleaning' and the cleaning table).
milk foamer
1 Connect the milk foamer to the coupling unit. (Fig. 15)
2 Connect the coupling unit to the motor unit (Fig. 16).
3 Plug in the appliance.
4 Heat up the milk to a temperature between 55°C - 65°C/131°F - 149°F.
Tip: You will achieve the best results if you use long-life milk with 3.5% fat content.
Note: Do not heat up the milk to a temperature beyond 65°C/149°F. Never let the milk boil.
Caution: Do not process more than 1 batch without interruption. Let the appliance cool down
for 5 minutes before you continue processing.
5 Pour the milk into a tall heat-resistant beaker.
6 Set the speed ring to the highest setting, press the turbo button and froth the milk for
approximately 60 seconds.
Note: Clean the milk foamer immediately after use (see chapter ' Cleaning' and the cleaning table).
Detaching the milk foamer
1 To detach the coupling unit, press the release button (Fig. 17).
2 To detach the milk foamer, pull it off the coupling unit (Fig. 18).
3 To detach the milk foamer cones, pull them off the milk foamer (Fig. 19).
cleaning (Fig. 20)
Do not immerse the motor unit, the coupling units, and the mini chopper lid (HR1653 only) or
the medium chopper lid (HR1655 only) in water or any other liquid, nor rinse it under the tap.
Use a moist cloth to clean the motor unit, the coupling units, and the mini chopper lid (HR1653
only) or the medium chopper lid (HR1655 only) (Fig. 21).
1 Unplug the appliance.
2 Press the release button on the motor unit to remove the accessory you have used.
3 Disassemble the accessory.
Note: To clean the potato bar, remove the paddle by turning it clockwise. (Fig. 13)
Tip: You can also remove the rubber rings from the chopper bowls for extra thorough cleaning.
4 See the cleaning table for further instructions.
Tip: For quick cleaning of the blender bar or the potato bar, pour warm water with some washing-up
liquid into the beaker or jar you have used, insert the blender bar or potato bar and let the appliance
operate for approx. 10 seconds.
storage
1 You can store the motor unit, the blender bar and the whisk in the beaker (Fig. 22).
EnglisH
11