Allen + Roth 19535-000 Guia Del Usuario página 4

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 30~60 minutes
Tools Required for Assembly (not included): Ladder, Phillips Head Screwdriver, Flathead
Screwdriver, Wire Cutters, Pliers, Safety Glasses
Helpful Tools (not included): Wire Stripper, Tape
ASSEMBLY INSTRUCTIONS
1. Unscrew canopy nuts (C) from fixture assembly (B)
and detach mounting bracket (A). Attach mounting
bracket (A) to the junction box (not included) with
junction box screws (AA).
Note: The preassembled screws on mounting
bracket (A) should protrude out from the junction box.
Hardware Used
Junction
AA
Box Screw
2. Make electrical connections using wire connectors
(BB). Refer to ELECTRICAL CONNECTIONS in
the Safety Information section on page 3.
Hardware Used
BB
Wire Connector
3. Place the fixture assembly (B) against the
mounting surface, allowing the preassembled
screws on mounting bracket (A) to pass through
the canopy of the fixture assembly (B).
Secure with previously removed canopy nuts (C).
1
x 2
2
BB
x 3
3
B
4
A
AA
A
C