Care And Maintenance; Troubleshooting - Allen + Roth 19535-000 Guia Del Usuario

CARE AND MAINTENANCE

• Clean this unit periodically. Clean the surface finish only using water and mild soap; dry with a
• soft cloth. Never use rough cloth, abrasives or chemical cleaners containing acids or harsh
• solvents.
• 30-watt total LED wattage included; do not attempt to replace the LEDs.

TROUBLESHOOTING

PROBLEM
Light will not turn on.
Fuse blows or circuit trips
when fixture is turned on.
WARRANTY
ENERGY STAR qualified Solid State product with non replaceable components is warranted for five
(5) years from the date of original purchase.
This warranty does not cover parts becoming defective due to misuse, accidental damage,
improper handling and/or installation and specifically excludes liability for indirect, incidental or
consequential damages. Product found to be defective may or may not be replaced with same or
like type product, contingent on the nature of the defect, and or replacement availability and/or
compensated for at a pro rated value. Some states do not allow limitations on how long an implied
warranty lasts, and/or the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific rights and
you may also have other rights, which vary from state to state. Proof of purchase is required to
exercise the warranty.
POSSIBLE CAUSE
1. Power is off.
2. Bad main supply wiring.
3. Defective switch.
Wrong wiring or power wire
is grounding out.
.
5
CORRECTIVE ACTION
1. Make sure power supply is on
2. Consult a certified professional
electrician.
3. Consult a certified professional
electrician.
Consult a certified professional
electrician.
allen + roth ® is a registered trademark
.
Printed in China
of LF, LLC. All rights reserved.