MS Schippers MS Automix 25 Instrucciones Para El Uso página 10

8. Remedying faults.
•
The most commonly occurring fault is the 1AT fuse blowing (on the outside of the control box), often as result of a
blockage. This blockage could be caused by a foreign object in the feed bunker but can usually be traced to too
little water which causes the mash to be too stiff. Clear the blockage and fit a new fuse. Only use fuses of the type
indicated next to the relevant fuse holder.
•
A poorly closing water valve is usually caused by too low water pressure or by sediment in the water. This fault can
often be cured by flushing through with clean water. With sufficient pressure, open the regulator valve completely
and press the test button several times.
•
For other faults please contact your supplier.
10