How To Operate - Zyris ISOLITE Instrucciones De Uso

NOTE: For countries outside the USA, installation may
need to be completed by a qualified service
technician. Please consult your in-country
representative for additional information.
Plug the Power Adapter into an
Step 2
electrical outlet. Plug the DC connector
into the Power Jack at the end of the
Power Hose. Connect the Control Head to
the head of the Power Hose. When
properly installed, a green LED indicator
light will appear on the LED Smart Stick.
Once connected, test the dual Vacuum
Levers to confirm suction functionality.
NOTE: For countries outside the USA, attach the
appropriate plug adapter to the power adapter. See
the illustration included with the Plug Adapter Kit.
Direct wire installations require completion by a
qualified service technician. Please consult your
in-country representative for additional information.
Place the Isolite in an open slot on
Step 3
the toolbar when not in use.

How to Operate

Using the Dual Vacuum Levers
Dual Vacuum Levers adjust suction
intensity in both the upper and lower
quadrants. To adjust, rotate the left and
right Vacuum Levers to the desired
suction intensity for each quadrant. To
shut off suction, rotate the levers to the
most downward position.
Using The Led Smart Stick
Adjust lighting functions by using the
one-button light control.
Operation Action
Turn light on / off Tap button once
Set brightness Press and hold button to cycle
through brightness levels;
release to set
Engage / disengage With light on,
cure-safe mode double-tap button
Table 1. LED Operation
The LED Smart Stick features an LED indicator
which provides the status of the system.
LED Indicator Status
Steady green, pulsing System is ready; power is
every 10 sec connected and the light is off
Steady green Light is on
Blinking blue With button pressed and
held, marks each of the
5 brightness levels
Steady amber Cure-safe mode
Steady blue Self-regulating temperature
control has automatically
lowered the brightness to
reduce heat level
Table 2. LED Status
EN
7