Loading The Vial - Lantheus Medical Imaging VIALMIX Guia Del Usuario

L O A D I N G T H E V I A L
With the cover open, the vial carrier is easily accessed for vial loading.
Complete the following steps to load the Definity
1 The vial carrier is spring loaded and opens to accommodate the
Definity vial by means of the release lever. Press the lever downward
®
to unlatch the vial carrier; then press the lever to the left to open the
carrier for vial loading.
2 Holding the Definity
by placing the top of the vial in the left cup of the carrier.The cups of
the vial carrier are molded to best accommodate the vial when the top
of the vial is placed in the left cup. Either position (i.e., the top of the
vial in either cup) is possible and will allow for acceptable activation
of Definity .
®
3
Release the lever and the spring action of the carrier will hold the vial
securely. Make sure that the vial is evenly supported by both cups of
the carrier.
4
Close the Vialmix cover.
®
Refer to the illustration on the Vialmix
*NOTE:
the vial carrier for the loading procedure.
vial between your thumb and fingers, load the vial
®
vial:*
®
unit, to the left of
®
O P E R AT I O N
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
IMPORTA N T: To
ensure cleanliness
of the Definity ®
vial septa, load the
vial with the flip-top
seal in place.
IMPORTA N T: Do
not operate Vialmix ®
without a vial in
the carrier.
3.2
5 1 5 3 7 0 - 0 8 1 0