Greenlee Shear 30T Instrucciones De Instalación página 3

Installing New Components (cont'd)
4. Remove the Hydraulic Cylinder (A) from the Cassette
Unit (B) as shown in Fig. 4.
A
Figure 4
5. Remove the screws for the material rest (7 & 8) as
shown in Fig. 5. Use a 5/8" hex wrench to hold the
standoffs (C) when removing screws.
8
Figure 5
6. Apply Loctite (9) onto new cap screws (7 & 8) as
®
shown in Fig. 6 and tighten them back with 35 ft-lbs
of torque.
Figure 6
Greenlee Tools, Inc.
7. Remove swing arm by unscrewing flange screw (4).
B
8. Remove spacer by unscrewing SEMS screw (6) and
7
9. Apply Loctite
C
3
Shear 30T Threadlocker Kit
Figure 7
remove adapter by unscrewing flathead screws (5).
6
Figure 8
(9) onto new flathead screws (5) as
®
shown in Fig. 9 and tighten the adapter back with
10 ft-lbs of torque.
Figure 9
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4
5