Mach Power AC-ATRI-018 Manual De Usuario página 11

ENG
• 001: swipe card for left side but right side freely
• 002: swipe card for right side but left side freely
• 003: left and right are freely
• 004: swipe card for left side but right side is not allowed =005 swipe card for ri-
ght side but left side is not allowed
P02: Illegal turnstile opening range,turnstile lock and back automatically once out
of range (system default is 10 degree)
P03: Passing time, measurement is second. Number 10 means 10 seconds. The
pedestrian not pass turnstile within pre-set time, turnstile will close.(system
default is 010,range is 000-060)
P04: Left side counter reset: press SET , then it display C-L, press INC , press INC or
DEC to reset.
P05: Right side counter reset: press SET , then it display C-L,press INC or DEC to
reset.
P06: System default reset :press SET Key, it will display P-2, press INC or DEC to
reset system default.
P07: Equipment communication address (System default is 001)
P08: Memory function setup (system default is 003)
• 000: both side with memory,
• 001: left side with memory
• 002: right side with memory
• 003: both side without memory
P09: Degree of angel after turnstile opening ,default is 15°
P10: Turnstile operation mode
• 000: both side need dual-signal control
• 001: left side need dual-signal control
• 002: right side need dual-signal control
• 003: Clutch locked automatically after turnstile open and close
P11: Turnstile can rotate freely after opening ,default is 20°
P12: Turnstile opening speed before people passing ,default is 18
P13: Turnstile opening speed when people passing ,default is 16
P14: Turnstile opening speed after people parsing ,default is 18
P15: Turnstile reducing angel degree after people passing ,default is 40
P16: 3 arms operation mode
• 000: Arm lift automatically after connect with power
• 001: Turnstile lift by people after connect with power
Exit from menu : Press INC or DEC , it display.
P00, press SET to exit from menu setup.
11