Handle
Assembly
Valve Stem
Spline
Escutcheon
1. Install Deck-Mount Handles
Close the valves (hot = clockwise, cold = counterclockwise).
Install the washer into the escutcheon base.
Thread the escutcheon onto the valve body.
Install the spline adapter about halfway onto the valve stem
spline.
Press the handle loosely onto the spline adapter, and check the
alignment of the handle.
For further alignment, remove the handle, and reposition the
spline adapter on the valve stem until the handle alignment is
correct.
Secure the handle with the screw, and press the plug button in
place.
For vandal-proof configurations, insert the applicable red or blue
vandal-proof button, and secure it with the screw.
Repeat for the other handle.
Kohler Co.
Vandal-Proof
Plug
Screw
Button
Vandal-Proof
Screw
Button
(Red/Blue)
Spline
Adapter
Washer
3
113433-2-BB