Stick Vacuum
CLEANING AND MAINTENANCE
Maintenance
CAUTION: Always be sure that the Stick Vac is turned OFF and UNPLUGGED
before cleaning or attempting to store the item. NEVER IMMERSE THE MOTOR in
water or any other liquid. NEVER operate the Stick Vac without the dust
container and filter in place.
How to Clean the Dust Container
1. Press the dust container release button to remove the dust container.
2. Remove the filter and empty the dirt in the dust container in to a trash
receptacle.
3. Shake the filter over the trash receptacle to remove dirt in the filter.
4. Replace the filter into the dust container and replace the dust container
securely on to the main body.
How to Clean the Stick Vacuum
1. Use a damp soft cloth to wipe the outside of the main body and handgrip.
2. The dust container (without filter) may be immersed in water to clean,
however, do not use abrasive cleaners or put it in the dishwasher. Allow it to
dry completely before re-attaching it to the main body.
3. Shake the filter over the trash receptacle to remove dirt in the filter. If
necessary the filter may be rinsed with water. Allow to dry complete before
inserting the filter back into the dust container.
4. Remove the filter and empty the dirt in the dust container in to a trash
receptacle.
5. Shake the filter over the trash receptacle to remove dirt I the filter.
6. Replace the filter into the dust container and replace the dust container
securely on to the main body.
How to Clear Clogs
Low suction or poor pick up may be due to a clog in the vacuum canister. If you
notice a change in the sound of the motor or a reduction in performance, check
for clogs. CAUTION: Always be sure that the Stick Vacuum is switched OFF and
unplugged before attempting to remove a clog.
1. Empty dust container.
2. Check dust container for buildup.
3. Check for clog in vacuum head.
4. Check floor tool
8
_________ ____
888-367-7373
MODEL: ZB06-25 PRODUCT CODE: 8651 07/2015
CLEANING AND MAINTENANCE
AFTER SALES SUPPORT
customer-service@wk-usa.com