THERMOHEAT RMC-FA50/C/L Manual De Usuario E Instrucciones De Funcionamiento página 7

PROPANE CONSTRUCTION HEATER
3. assembling the Cord wrap attachments:
parts required: Screw ST3.5x10,
(4 pc in the accessories bag),
and Cord wrap attachment 2 pc)
place the cord wrap attachment
as shown, then use phillips
screwdriver to tighten the screws
and secure the cord wrap attachments.
4. regulator and hose Connection:
See figure on right.
Connect the hose tightly to
the heater using a wrench.
please also refer to
page 8 in the manual.
RMC-FAIOOC/L
RMC-FA125L/L-01
hose assembly
Tighten, clockwise,
use a wrench
6