peerless-AV I-Beam FPECMI-01 Manual De Instalación página 5

Insert two M10 x 16 mm socket screws (E) and
5
two split lock washers (F) into bottom of adapter
box (A) leaving 1/4" exposed thread as shown in
figure 5.1 and detail 1.
A
fig. 5.1
DETAIL 1
Unscrew hex nuts from u-bolts (I). Secure adapter
7
box (A) to support column (D) with two u-bolts (I)
and two hex nuts.
Adjust swivel of adapter box as shown and tighten
all fasteners.
D
A
I
F
E
1/4"
HEX NUTS (I)
Insert one 3/8-16 x 4" flat head bolt (J) through
6
bottom hole of support column (D) and secure with
3/8" nylock nut (K).
Set adapter box (A) onto support column (D).
Insert support column (D) into ceiling assembly
8
(C). Align holes of support column with holes of
ceiling assembly and secure using two 3/8-16 x 4"
flat head bolts (J) and two 3/8" nylock nuts (K).
C
K
D
5 of 24
ISSUED: 08-09-10 SHEET #: 061-9059-5 07-08-15
A
D
J
K
J