Battery Replacement; Warranty; Technical Specifications - Selecta VR 2000 Manual De Instrucciones

INSTRUCTION MANUAL CODE 80247 REV A
Battery
J
.P. SELECTA s.a.
March/2011

7.2 Battery replacement

VR-2000 can save many data in the RAM memory, and so a battery is needed in
the circuit board.
You will have to replace the battery when it is exhausted.
Switch off and unplug the equipment
(VERY IMPORTANT: high voltage).
Unscrew the board's 13 screws and remove it.
Remove the old battery and place the new one.
Place again the board and the 13 screws.

8 WARRANTY

This product is guaranteed for one year from the date of purchase and it covers
defective components and assembly.
Please keep the purchase ticket as it is the only valid document for the purchase date.
This guarantee does not cover damage caused by an incorrect use of the equipment.
This equipment must be properly validated before its use in the value sample analysis
for the user.
Any return without the authorization of J.P. SELECTA, s.a. is not accepted.

9 TECHNICAL SPECIFICATIONS

Model
Optical system
Wavelength range
Stray light
Band width:
Photometric range:
Wavelength accuracy:
Wavelength repeatability:
Photometric accuracy:
Stability:
Display:
Data output:
Weight (Net):
Dimensions: Depth x Width x Height
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(It can be modified without notice)
VR 2000
one single beam
325-1100nm
0,2%T @ 220nm & 360nm
4nm
0-200%T, -0.3-3.0A
±1.0nm
≤0.5nm
±0,5%T
0,002A/h @ 500nm
128x64 dots matrix LCD
USB, parallel port
12 Kg
490 x 360 x 210 mm
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 32