Installation Layout; Preparatory Steps - AS Torantriebe R50 24V Instrucciones De Uso E Instalación

VULCAN actuator
Blinker
Aerial
Key or digital selector
Safety edge (EN 12978)

PREPARATORY STEPS

The new series of actuadors VULCAN, has been devised to serve gates up to 800 Kg with leaf up to 3 meters wide (look at the table
technical data). Before proceeding with the installation, please make sure that your gate opens and closes freely, and that:
• Hinges and pins are in optimum condition and properly greased.
• No obstacles are within the moving area.
• There is no friction with the ground or between the leaves.

INSTALLATION LAYOUT

cable 4 x 1 mm 2
cable 2 x 1,5 mm 2
cable RG-58
cable 2 x 1 mm 2
-
Internal photocells
External photocells
Control unit
9
cable 4 x 1 mm 2 (RX)
cable 2 x 1 mm 2 (TX)
2
cable 4 x 1 mm (RX)
cable 2 x 1 mm 2 (TX)
cable 3 x 1,5 mm 2