Changing Dust Bag - Panasonic QUICKDRAW MC-V7319 Instrucciones De Operación

Always operate vacuum with genuine Panasonic Type U3 Standard, U6 Electrostatic or U10
HEPA dust bags installed. Panasonic dust bags may be purchased through any authorized
Panasonic dealer or ordered from service company.
Slots
Fentes
Ranuras
Fold
Plier
Doble
Groove
Ouverture
Ranura

Changing Dust Bag

1)
➢ Pull outward on dust cover grip to
remove the dust cover.
2)
➢ Remove dust bag by grasping
cardboard portion and pulling out.
3)
➢ Spread out new dust bag, taking care
not to tear bag.
4)
➢ Fold new dust bag to clear slots as
shown.
➢ Attach new dust bag onto bag holder
by holding cardboard portion and
pushing back.
5)
➢ Reinsert tabs on end of dust cover
into grooves on dust compartment to
allow cover to rotate closed.
➢ Rotate dust cover up into closed
position and press into place without
pinching dust bag.
- 30 -