Proctor Silex 49969 Manual Del Usuario página 12

Troubleshooting Tips
PROBLEM
Water remaining
in reservoir.
Noise or steam at
the end of brew
cycle.
Coffee not
dispensing.
Water reservoir
fills too slowly.
Failed foil seal.
Short brew cycle.
(cont.)
PROBABLE CAUSE/SOLUTION
• Added too much water. Remove single-
serve pack and replace brew basket. Repeat
brewing cycle.
• Reduce amount of water in reservoir.
• Brew a different type of single-serve pack.
• Piercing nozzle is clogged with coffee grounds.
Turn unit off; unplug. Allow unit to cool
completely. To remove any built-up coffee
grounds, insert end of bent paper clip into eye
of piercing nozzle.
• Unit hasn't cooled down. Allow 2 minutes
between brewing cycles.
• Try filling water reservoir before pushing down
brew basket handle to pierce single-serve
pack. Start brewing cycle.
• There is variability in the single-serve pack
manufacturing process which causes some
types of single-serve packs to be weaker
at the seams. Let cool 2 minutes between
brewing, use less water, or try a different
brand.
• Single-serve pack is difficult to brew due to
the coffee and its processing.
• Try a different brand of single-serve pack.
12