Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To Program
Automatic Brew
NOTE: White LED comes on to indicate PROGRAM
is activated. White LED light goes off when unit begins
to brew at preprogrammed time.
1. Choose a brew option.
2. Press and hold PROG button until HOUR light flashes.
3. While pressing PROG button, press the
TIME button to select the desired brew
time. Release PROG button and time will
be set.
4. Programmed time will be stored and the
current time will be displayed.
5. Press and release PROG button again
to activate automatic brew. PROG
light comes on.
Tips for
Best-Tasting Coffee
• All coffees are made from either arabica beans or robusta beans,
or some combination of both. Arabica beans are slightly more
expensive, but tend to produce better-tasting coffee.
• Ground coffee will become stale much faster than whole beans.
If buying preground coffee, chose a package with the latest
expiration date or a smaller quantity.
• If grinding whole beans, set your coffee grinder on a fine/medium
grind. This will yield the best-tasting grounds. Try to use freshly
ground coffee within about a week of grinding.
• Using a water filter, filtered water, or bottled water will yield better-
tasting coffee than tap water.
• Use approximately 1 tablespoon (15 ml) of grounds for each cup of
coffee being made. To avoid overflow, use about 1/3 less grounds
when brewing decaf or flavored coffees.
• Make sure your coffee maker is clean. See "Care and Cleaning"
section.
3
5
7
Publicidad
Tabla de contenido
