Restoring The Original Configuration - SOMFY ALTUS RS 50 io Guía De Usuario

EN
2. 4. 3. Restoring the original configuration
Only switch o the power for the motorised product to be
reset.
This reset deletes all control points, sensors and travel end
stop settings and resets the favourite (my) position of the
motorised product.
Position the motorised product at the mid-height position.
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to 15 seconds.
3)
Cut the power supply for 2 seconds.
4)
Restore the power supply: the motorised product moves for
5)
a few seconds.
Press the PROG
6)
io-homecontrol® control point for
the motorised product moves up and down twice:
The drive is now reset to its original configuration.
Images not contractually binding
40
button on the local
7 seconds, until
1)
5 seconds.
3)
ON
15 seconds.
5)
ON
Somfy
6)
Copyright © 2016 Somfy SAS. All rights reserved.
2)
OFF
2 sec.
4)
OFF
2 sec.
my