Soba XT610 Modo De Empleo página 2

XT610 TOWER FAN
PLEASE READ THE OPERATING INSTRUCTIONS AND KEEP THEM FOR FUTURE
REFERENCE.
Power 230 V~
mains frequency: 50 Hz
Capacity: 50 W
Dimensions: Ø 112×540 mm
Remote control batteries: 2 AAA / 1.5 Volt
COMPONENTS
1. Front half of base
2. Front half of column
3. Motor support
4. Casing front
5. Cover screen
6. LED display
7. Control buttons
8. Casing cap
9. Rotor
10. Back of casing
11. Rear half of column
12. Rear half of base
ASSEMBLY
1. Draw the mains lead through the cable duct in the two column halves (2 + 11).
Fit the two halves of the column together.
2. Screw column and fan casing together with four cross head screws (M5x12).
Make sure that the small pin (B) fits into the small hole on the motor support.
3. Draw the mains lead through the central opening (C) and the cable duct (D) at
the rear of the base. Fit the two halves of the base together to complete the base.
Screw column and base together with four cross head screws (M5x32). The small
metal pin on the front of the base (A) must be fitted into the hole on the base.
7
6
5
4
3
2
1
10
11
12
2
INSTRUCTIONS
8
9
10
11
12
C
3
B
D
2
A
1