Philips Norelco 8892XL Manual Del Usuario página 21

8892_91_90XLDFUwspanish.qxd
C
C
C
1
2
7/7/04
Remove and clean one set of cutters and
4
combs at a time.
Separate the cutter from the comb and
5
rinse clean under hot water.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
6 Replace the set back into the Razor Head
Assembly so that the 'wings' on the comb
fit within the brackets located towards the
center of the Assembly.
The set will only fit into the Razor Head
Assembly if the 'wings' are between the brackets.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
Repeat the process for the other two sets
7
of cutters and combs.
Replace the frame.
8
Press down and turn wheel clockwise until
9
it locks into place.
Replace the Razor Head Assembly back on
10
razor.
9:44 PM Page 21
ENGLISH
(Black plate
21