Metra Electronics 99-6520B Instrucciones De Instalación

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) A/C button housing • D) Pocket • E) Console bracket • F) (6) #8 x 3/8" Phillips pan-head screws
• G) (2) Panel clips • H) Climate extension harness (not shown) • I) Axxess interface and harness (not shown)
A
B
The World's best kits.
®
Dodge Journey
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Included interface retains factory screen
• Painted matte black to match factory finish
Note: Does not retain sound from "Driver Convenience Group"
C D
F
MetraOnline.com
2011-up*
E
G
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-6520B
I N S TA L L AT I O N I N S T R U C T I O N S
U.S. Patent # D755,778 D768,126
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
– ISO DIN radio provision with pocket .................5
– ISO DDIN radio provision ....................................5
Axxess interface installation .............................6-11
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Interface and harnesses included
Antenna Adapter: 40-EU10 (sold separately)
Steering Wheel Control Interface: ASWC-1
(sold separately)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 6/7/19 INST99-6520B