Honeywell DLC203AE Serie Manual De Instrucciones página 9

USE & OPERATION (CONTINUED)
ADDING ICE PACKS
Four re-freezble Ice Packs are included to help enhance the cooling effect when required.
Freeze the ice packs in a freezer. When frozen, you can insert them into the water tank of the air
cooler. You can choose to use all four at one time or use 2 at a time so you can exchange the ice
packs when one set has melted, for continuous cooling.
IMPORTANT: Adding the ice packs into the water tank will increase the volume of water in the tank.
It is best to add the ice packs when the water tank is empty or only half-full, to avoid the water tank
over-flowing.
WARNING: DO NOT attempt to open the ice packs or consume the ice crystals from inside of the ice
packs.
Insert Ice Packs from the Back of the Unit:
1. Turn OFF the unit and unplug unit from the electrical outlet.
2. Carefully pull out the Honeycomb Frame.
3. The Ice Packs can be placed into the tank once the Rear Grill
/ Mesh Filter & Honeycomb Frame with Honeycomb Cooling
Media have been removed from the back of the unit.
WARNING: NEVER open the Rear Grill/Mesh Filter while the unit is operating. Only access or
exchange the ice packs when the unit is turned OFF.
EN 8
Ice pack
Back Side