Launch Of The Various Cleaning Modes; Automatic Cleaning Mode; Spot Cleaning Mode; Full Go Cleaning Mode - e.ziclean SLIM Serie Manual Del Usuario

7. Launch of the various cleaning modes

A. AUTOMATIC CLEANING MODE:
The AUTOMATIC cleaning mode provides optimal cleaning coverage of your rooms for a period of
approximately 90 min., depending on the nature of your floors. Once its batteries are spent, the
e.ziclean® SLIM SERIES returns to charge itself on its base.
Press on the button
B. SPOT CLEANING MODE:
The SPOT cleaning mode allows for concentrating the robot vacuum cleaning on a restricted area,
and for a period of 4 minutes. This method of cleaning is ideal to clean particularly dirty area.
Once its task completed, the e.ziclean® SLIM SERIES will stop in place. Its return to the charging
base must be performed manually from the DOCK button on the remote control or on the unit.
Press on the button
C. FULL GO CLEANING MODE:
The FULL GO mode corresponds to the continuous cleaning by the robot vacuum. Once the
AUTOMATIC cleaning cycle is complete, the unit will return to its base to recharge and will begin a
new AUTOMATIC cleaning cycle when its battery is full.
Press on the FULL GO button of the remote control in order to enable or disable this cleaning mode.
Note that when the FULL GO mode is active, the cleaning slots programmed are temporarily
suspended.
D. QUICK CLEANING MODE:
By default and for all cleaning modes, the e.ziclean® SLIM SERIES navigation speed is normal. It
can be accelerated manually.
Press on the V button on the remote control in order to enable or disable this option.
of the remote control in order to launch this cleaning mode.
of the remote control in order to launch this cleaning mode.
15
.EN.