Voice Announcements And Troubleshooting - e.ziclean SLIM Serie Manual Del Usuario

12. Voice announcements and troubleshooting

The robot e.ziclean® SLIM SERIES vacuum is equipped with a voice announcement feature. They
inform the user about the cleaning status, programming the device etc.
These announcements also allow for communicating an abnormal use of the robot vacuum. Below
you will find a summary of the sources of possible failures, as well as the following troubleshooting
procedure:
VOICE ANNOUNCEMENTS FOR INFORMATION PURPOSES
e.ziclean, at your service.
AUTOMATIC cleaning mode.
SPOT cleaning mode, duration 3 minutes.
FULL GO mode enabled.
FULL GO mode disabled.
Maximum cleaning speed.
Normal cleaning speed.
Robot recharging status
Return to the charging base.
e.ziclean, charging in progress.
Setting the time and Programming.
Setting the daily programming.
Programming complete.
Setting the time.
Time setting complete.
VOICE ANNOUNCEMENTS REQUIRING AN ANNONCES VOCALES NÉCESSITANT UNE
Main brush blocked.
Right wheel blocked. Ensure that to foreign body is hampering the right wheel's rotation.
Left wheel blocked.
Vacuuming problem.
Right side brush
blocked.
Left side brush
blocked.
Welcome message
Cleaning mode
Check the condition of the main brush compartment.
Ensure that to foreign body is hampering the left wheel's rotation.
Check the condition of the main brush compartment, as well as that of the
filter.
Check the condition of the right side brush compartment, and that it is not
hampered by a foreign body.
Check the condition of the left side brush compartment, and that it is not
hampered by a foreign body.
INTERVENTION
23
.EN.