Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
GFCI Test
WARNING:
Observe all safety precautions when
working on live voltages. The GFCI test function can only be
used on 120 volt AC receptacles with GFCI protection.
1. Check the instructions on the specific GFCI device you are
testing before proceeding.
2. Press the test button on the GFCI receptacle. The GFCI should trip.
If not, do not use the receptacle and consult a qualified electrician.
If it does trip, press the reset button on the GFCI receptacle.
3. Insert one test probe into hot side of the outlet being tested.
4. Insert the other test probe into the ground of the outlet being tested.
5. The tester should indicate 120VAC if the outlet is powered
and wired properly.
6. Press the GFCI test button.
7. The indicator lights should turn off indicating the GFCI has tripped.
8. If the GFCI does not trip, either the receptacle is miswired or the GFCI
is defective. Do not use the receptacle and consult a qualified electrician.
Note: The tester cannot test GFCI operation on 2-wire (non-grounded) outlets.
Specifications
Voltage LED steps
12, 24, 48, 120, 208, 240V
Accuracy
-30% to 0% of indication
Response time
<0.1s
AC frequency range
50/60Hz
Operation time
30 seconds maximum
Recovery time
10 minutes after maximum operation time has been reached
Overvoltage protection
250V AC/DC <5s
Temperature range
14° to 131°F (-10° to 55°C)
Relative Humidity
80% maximum
Altitude
7000ft (2000m)
Pollution Degree
II
Safety
Complies with EN61010-1, for use in Overvoltage
CAT III environments
5
REGISTER YOUR PRODUCT
Register your product purchase at www.southwiretools.com or by scanning
the QR code on this manual. At Southwire, we are dedicated to providing you
with the best customer experience. By following a few quick steps to register,
you can experience quicker service, more efficient support, and receive
information on our future products. Simply provide your model number,
serial number, and just a few pieces of information about yourself –
it is that quick and easy.
LIMITED WARRANTY AND LIMITATION OF LIABILITY ON
SOUTHWIRE METERS & TESTERS
Southwire Company, LLC warrants this product to be free from defects in
material and workmanship for two years from the date of purchase. This
warranty does not cover fuses, disposable batteries, or damage arising from
an accident, neglect, misapplication, contamination, modification, improper
maintenance or repair, operation outside of specifications, or abnormal
handling of the product. Southwire's sole liability, and the purchaser's
exclusive remedy, for any breach of this warranty is expressly limited to
Southwire's repair or replacement of the product. Whether Southwire repairs
or replaces the product will be a determination that Southwire makes at its
sole discretion.
SOUTHWIRE MAKES NO WARRANTY THAT THE PRODUCT WILL
BE MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE.
SOUTHWIRE MAKES NO OTHER WARRANTY, EXPRESSED OR
IMPLIED, OTHER THAN THE WARRANTY SPECIFICALLY SET FORTH
HEREIN. SOUTHWIRE WILL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR
ANY BREACH OF THIS WARRANTY.
This warranty is void if this product is used for rental purposes. No product
reseller is authorized to extend any other warranty on Southwire's behalf
relating to this product, and no such reseller warranty will be binding on
Southwire. If you have a warranty claim, or if the product needs to be
serviced during or after the warranty period set forth above, please contact
the Customer Service Department at 855-SWTOOLS (855-798-6657).
The sender is responsible for all shipping, freight, insurance, and packaging
costs associated with sending a product to Southwire. Southwire will not be
responsible for lost or damaged products returned pursuant to this warranty.
All products returned to Southwire under this warranty should be mailed to:
Southwire Company, LLC
Attention: Tool Warranty Return
840 Old Bremen Road
Carrollton, GA 30117
6
Publicidad
