3M M1 Instrucciones página 4

Warranty
Removal Instructions:
1. To help minimize damage to the surface where 3M™ Vinyl Tapes 471, 5700, and 5702 have been applied, it
is recommended that the tape be lifted gently at a corner and then pulled-up at an angle. Use of warm heat
(e.g. heat gun) applied evenly to the tape backing surface may help remove tape.
Note: Overheating may damage the underlying surface or finish.
2. Adhesive residues may be softened by use of many common solvents such as heptane, toluene, methyl
ethly ketone, or 3M™ Citrus Based Cleaner.
3M warrants that the Lane Marking Applicator M1 P/N 70-0067-5895-0, Type 011400, will be free from defects for
ninety (90) days after delivery. If any part is proved to be defective within the warranty period, then 3M's the
exclusive remedy and 3M's and seller's sole obligation shall be, at 3M's option, to repair or replace the part,
provided the defective part is returned immediately to 3M's factory or an authorized service station designated by
3M. A part will be presumed to have become defective after the warranty period unless the part is received or 3M
is notified of the problem no later than five (5) calendar days after the warranty period. If 3M is unable to repair or
replace the part within a reasonable time, then 3M, at its option, will replace the equipment or refund the
purchase price. 3M shall have no obligation to provide or pay for the labor required to install the repaired or
replacement part. 3M shall have no obligation to repair or replace (1) those parts failing due to operator misuse,
carelessness, or due to any accidental cause other than equipment failure, or (2) parts failing due to
non-lubrication, inadequate cleaning, improper operating environment, improper utilities or operator error.
Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the
use and performance of a 3M product in a particular application Given the variety of factors that can affect the
use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining
whether it is fit for a particular purpose and suitable for user's method of application.
Warranty, Limited Remedy, and Disclaimer: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF
MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY
IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, A CUSTOM OR USAGE OF TRADE:
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from
the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
For Additional Product Health and Safety Information, see:
Material Safety Data Sheet, or Call:
3M Industrial Adhesives and Tapes Division
St. Paul, MN 55144-1000 USA
1-800-364-3577
www.3M.com/adhesives
3M is a trademark of 3M Company
© 3M 2014. All rights reserved.
Made in USA with Globally Sourced Materials. Printed in USA.
34-8714-3263-8