Synchronizing & Color Changing - Spectravision Adagio PRO Manual Del Propietário

Synchronizing & color changing (for RGB and TW lamps only)
Manual synchronization
1. Switch ON the 12 VAC line voltage and make sure that all lamps light up.
2. Switch OFF the 12 VAC line voltage and wait for at least 20 sec.
3. Switch ON and switch OFF
4. Switch ON and switch OFF
5. Switch ON
6. The lamps should now all be on color program 1
for RGB lamps: fixed blue light (Deep blue Sea)
for TW lamps: 3200K
Changing colors
Quickly turn the lamps OFF and back ON
The lamp will jump to the next color program ( 1 --> 14 )
Memorizing the last color
Turn the lamp OFF for MINIMUM 20 seconds
The last chosen color has now been memorized
The use of PLP-REM or PLP-REM-300 control units enables extended features like
automatic synchronisation, dimming and DMX / RS485 control
16