Steelcase Answer Manual De Montaje página 8

®
For Parallel, One-Sided with Mid-Storage Support
(continued)
4.
Locate the supports 2-3/4" from the front of the storage
unit (4a), and 1/32" back from the edge (4b). Mark all hole
locations and drill 1/8" diameter pilot holes through the
laminate surface only (hole depth only a 1/4"). Secure each
support with four (4) 7/8" long pan head screws provided.
5.
Determine the location of the end of the storage unit on
the beam.
6.
Put a pencil line on the beam top cap at 9-3/8" from the
end of the mid-storage location (6a), and a second pencil
line at "X" from the first line (6b), per the table below.
Mid-Storage "X" Between Stanchion
Width (inches) Brackets (inches)
36
42
48
54
60
66
72
17-1/4
23-1/4
29-1/4
35-1/4
41-1/4
47-1/4
53-1/4
1/32"
4b
6a
4a
2-3/4"
"X"
9-3/8"
6b
END OF
5
STORAGE
UNIT LINE
Page 8 of 100
100137 Rev A