AVM FRITZ!DECT 210 Instalación Y Operación página 4

Ocultar thumbs Ver también para FRITZ!DECT 210:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
Registering FRITZ!DECT 210 with the FRITZ!Box
1. Insert the FRITZ!DECT 210 into an outlet near your FRITZ!Box. The "DECT" LED starts
to fl ash.
2. Within two minutes, press the "DECT" button on your FRITZ!Box.
Hold the button down until the "Info" or "DECT" LED (depends on the model) begins
fl ashing.
3. FRITZ!DECT 210 is registered with the FRITZ!Box. The wireless connection has been
established when the "DECT" LED on FRITZ!DECT 210 lights up.
If "DECT" continues to fl ash, registration was not successful. Remove
FRITZ!DECT 210 from the power outlet and repeat the registration process.
4. Now insert FRITZ!DECT 210 into the socket where you would like to use the device.
FRITZ!DECT 210 automatically re-registers with the FRITZ!Box. The connection has
been established when the "DECT" LED on FRITZ!DECT 210 lights up.
If "DECT" keeps fl ashing, test a diff erent outlet closer to the FRITZ!Box.
The outlet must be located within the range of the DECT radio network of the
FRITZ!Box.
6
1
On/Off
DECT
2
4
On/Off
DECT
3
DECT
On/Off
On/Off
DECT
DECT
7

Publicidad

Tabla de contenido
loading

Tabla de contenido