Using The Appliance - TEFAL Cuisine companion Instrucciones De Uso

0828792_NoticeCuisineCompanion_SM_Mise en page 1 05/12/13 14:59 Page70
Selecting custom settings:
Selecting the motor speed.
2 intermittent speeds and 10
continuous progressive speeds.
Selecting cooking speed.
From 30° to 130°C.
Heating indicator light: it lights up
when cooking starts and switches
off when the temperature inside
the bowl falls to below 50°C.
Selecting operating time.
From 5 sec to 2 hours.
Selecting the turbo functions
(maximum speed in direct access)
and pulse (intermittent operation)
without using other settings.
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability. In the event
of instability, the motor rotation speed will be automatically reduced, if this instability continues,
the motor will be stopped and "STOP" will be displayed on the screen.
• Check that the quantity of ingredients is not too large and that the speed used is the correct
one.
• Check that you are using the recommended accessory.
• Then restart your appliance normally.
Increase speed, cooking
temperature and duration.
Decrease speed, cooking
temperature and duration.
This button has 3 functions:
- "Validation" of
choice of your automatic
programme or
parameters chosen in
the context of manual
use (speed, cooking
temperature, time).
- "Pause" during use,
once the appliance has
C
been started up.
- "Reset" of
parameters selected on
the appliance
pressing for 2 seconds.
F
C D
F G
70

USING THE APPLIANCE

Plug in the appliance, set the switch (H) to 1, and the LCD screen (C) displays all settings at "0"
(See Fig. 9)
AUTOMATIC PROGRAMME MODE
1- Press the programme of your
choice (B1), a triangle
appears on the screen (C4)
C D
in the selected programme.
the
In the case of the soups,
stews
your
programmes,
pressing takes you to the
different sub-programmes.
F G 2- The
settings can be modified for
the time
D E
(depending on the chosen
the
recipe,
quantities prepared). Press
by
the speed selector (B2) or
the cooking temperature
selector (B3) or the time
selector (B4), the setting
chosen will flash on the
G H I
screen (C1-C2-C3).
3- Adjust the setting(s) using
C
the +/- selector (B6).
E
4- When you have finished
modifying all your settings,
press the "start" button
F G
(B7)
programme.
H I
appliance is using cooking
mode, the red indicator light
(B3) lights up to inform you
that cooking has started.
5- When the programme has ended, the
appliance emits 3 beeps.
E
6- At the end of the sauce, soup, stew
programmes P2 and P3, steam dishes and
and pastry creamy desserts, the appliance automatically
successive changes to keep warm mode for 45 minutes to
maintain the preparation
consumption. To stop keep warm mode, simply
press the "stop" button (B7). If you open the
H pre-programmed I lid, press the locks (D2) or remove the bowl
and keep warm mode will be automatically
of a recipe stopped.
At the end of kneading in the pastry
ingredients and programmes P1 and P2, the appliance changes
to "dough rising" mode at 30°C for 40 minutes
to give your dough more volume. If you open
the lid, press the locks (D2) or remove the
bowl, the appliance changes to pause mode
and you have the possibility of restarting it by
pressing "start" again.
If you wish to stop this mode, press and hold
the "stop" button for 2 seconds.
D E
7- Press the locks (D2) and then remove the bowl
assembly (D) (See Fig. 12).
When the automatic programme is started up, you
have the possibility of stopping the appliance at
any time by pressing the "stop" button. The
automatic programme is then in pause mode, you
have the possibility of restarting by pressing the
H I
to start the "start" button again. If you have chosen the
When your wrong programme and if you want to cancel it,
press and hold the "stop" button for 2 seconds.
71
ready for