Sight mark Flip 30mm Manual De Usuario página 5

MOUNTING THE MAGNIFIER:
1) Using the Allen wrench, loosen the four set screws on the
30mm mount (1).
2) Remove the top part of the mount and insert the magnifier
into the mount's base ring.
3) Re-attach the top part of the ring mount and tighten the set
screws.
MOUNTING TO YOUR FIREARM:
1) Release the quick-detach lever (3).
2) Position the mount onto your firearm's weaver mount. Align the crossbolt of the mount
between the grooves of the weaver mount.
3) Flip the quick-detach lever (3) till it firmly snaps into position.
* If the quick-detach lever is difficult to engage or the mount is shifting, adjusting the mount's width is required. See adjusting quick-detach mount
ADJUSTING THE QUICK-DETACH MOUNT:
1) Release the quick-detach mount (3).
2) To tighten the mount, rotate the lever clockwise. To loosen the mount, rotate
the lever counter-clockwise.
3) Re-attach the mount to the firearm. Repeat steps 1 and 2 if necessary.
.
2