UPPAbaby VISTA 2015 Serie Guia De Instalacion

ENGLISH
NOTE: Prior to fitting adapters to stroller frame, engage brake on stroller and remove seat from frame.
FOR USE WITH VISTA 2015+ AND ALL CRUZ MODELS
To Attach Adapter to Stroller Frame:
1 Insert bracket adapter into housing with arrows pointing away from handlebar.
Firmly snap in adapter.
To Remove Adapter from Stroller Frame:
2 Push side buttons and lift adapter from frame.
FOR USE WITH VISTA MODELS PRODUCED PRIOR TO 2015
NOTE: Must be used with included post adapters.
To Attach Adapters to Stroller Frame:
1 Place post adapters (logo facing out) onto seat attachments and press until you hear a click.
2 Insert bracket adapter onto housing of post adapters with arrows pointing away from
handlebar. Firmly snap in adapter.
To Remove Adapters from Stroller Frame:
3 Push side buttons and lift bracket adapter from frame.
4 Push down release button on backside of each post adapter and lift up from stroller frame.
NOTE: There are 2 post adapters, one for the left and one for the right side of the stroller. The adapters
are marked with "L" and "R" respectively. (The left adapter and left side of the stroller are determined by
the driver's left.)
NOTE: Indicators should appear green as confirmation of secure installation. If the indicator symbol is red
then the post adapter is not secure. Remove the adapter and try fastening it again.
FITTING CAR SEAT TO ADAPTER
To Attach Car Seat to Adapter:
1 Snap in car seat firmly with seat facing the stroller handle bar.
2 Lift up on car seat handle to check attachment.
To Remove Car Seat from Adapter:
3 Pull release on back of car seat and lift.
WARNING
FAILURE TO FOLLOW THESE WARNINGS AND
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY
OR DEATH. READ ALL INSTRUCTIONS BEFORE USE:
• Audible "click" must be heard in order to determine that the adapter is locked
into the stroller frame. To ensure proper locking engagement, pull on the adapter
without pressing the release button. It should stay attached to the frame.
• Weight limitations: recommended only for children within the height and weight
limits of models specified in this manual.
• Always use infant car seat restraint system as recommended by manufacturer.
• Intended for use with UPPAbaby VISTA and CRUZ strollers only.
US
UPPAbaby, 276 Weymouth Street, Rockland, MA 02370 | uppababy.com | 1.844.823.3132
CANADA
5514 KM Corporation, 201 Wicksteed Avenue, Suite 2, Toronto, ON. M4G 0B1
uppababy.com | 1.844.823.3132
Model 0207 | Version 4
Made in China | Fabricado en China | Fabriquè en Chine
All rights reserved. © 2018 UPPAbaby. UPPAbaby and all associated logos are trademarks.
All product specifications are correct at time of print. 10318
Infant Car Adaptador Adaptateur
Seat Adapter para Silla pour Siège
de Seguridad Auto de Bébé
for Peg Perego
para Peg Perego pour Peg Perego
For use with | Diseñado para todos| Produit conçu pour tous:
Peg Perego Primo Viaggio 4-35
For use with all model years | Diseñado para todos los modelos de los año
Produit conçu pour tous les modèles des années