Problem
Device is on and batteries
replaced, but no heat pulse
is emitted during treatment
Device beeps five times and
Ring Light flashes
9. Technical Specifications
Type
Max. temperature
Operating Duration per Battery
Set
Power supply
Dimensions (L x W x H)
Weight (with batteries)
Functions
Solution
Device has entered standby mode,
possibly because the Pulse Button was
pressed and held for longer than two
seconds. Shut the device off and then
back on again.
Device may be damaged or faulty; Shut
device off and wait 10 minutes before
restarting. If the device does not begin
working normally upon restart, contact
Customer Service
BR 60
122 °F ± 3.6 °F (50 °C ± 2 °C)
Approx. 300 applications
2 x 1.5 V AAA LR03 batteries
3.85 x 1.4 x 0.8 in (98 x 36 x 20 mm)
1.65 oz (47 g)
2 time settings (3s/6s)
15