Real Flame JENSEN Co 142NG Manual Del Propietário página 7

ASSEMBLY INSTRUCTIONS
3.) Connecting your fire table to the natural gas source:
A professionally installed shut-off valve between the supply piping and the socket is
recomended by the National Fuel Gas Code, and must be used for this fire table. A
professional gas technicial or plumber must make sure that your house's gas system
is capable of providing the correct amount of gas at the correct pressure for your ire
table to operate safely and correctly.
The socket connection must be made outdoors. The diagram below shows the main
components of a standard natural gas connection.
If the socket connection is below the fire table, no part of the hose may contact the
side panels or base panel of the burner area when the table is in its normal operating
position.
Quick Connect Socket
Gas Hose
Changing the fire table from natural gas to LP gas after purchase and use will be the
responsibility of the customer. The burner and burner ports should be exchanged with the
burner manufacturer to switch gas types. The expense associated with making this change is
the responsibility of the customer. Installation and service must be performed by a qualified
service agency or gas supplier.
House Natural Gas Piping
Shut-Off Valve
NOTE
7