Publicidad
Idiomas disponibles
Idiomas disponibles
HavenView
CountrySide Installation Instructions - 6-ft. and 8-ft. Stair
™
20
Position the crush block and holder into the
bottom rail, and locate the two screw holes.
Remove the holder and pre-drill using a
1/8-in. drill bit. Reposition the crush block and
holder, and secure with the supplied #8 x 1-in.
screws. Do not overtighten.
21
Carefully position the pre-assembled railing in-
fill between the posts, then slowly lower over
the bottom brackets until fully seated.
Please visit https://www.fiberondecking.com/resources/installation-instructions or call Consumer and Technical Support at 800-573-8841.
22
Center the H-bar on the post and check rail
for plumb.
23
Starting at the top, secure the H-bar to
the posts at both ends using the supplied
#10 x 2-1/2-in. self-drilling pan head screws.
Do not overtighten.
24
Position the top rail over the infill assembly,
and carefully lower into place.
The most recent installation instructions can be found on our website.
25
Using supplied 1-1/2-in. screws, secure the top
rail starting as close to the post as possible.
Space the remaining screws evenly.
26
Complete the assembly by gluing the post
caps in place with a quality exterior-grade
adhesive.
10
Publicidad
