Pre-Installation (continued)
PACKAGE CONTENTS
Part
A
B
Installation
1
Installing the batteries
NOTE: In typical use, alkaline batteries will last up to
one year.
Press the catch on the doorbell (A) to remove
the doorbell (A) from the doorbell back
plate (1).
Install 3 alkaline "C" batteries (not included)
into the doorbell (A). Make sure batteries are
installed according to the diagram inside the
chime
2
Removing the battery tab
Remove the back of the push button (B) by
pushing in the tab on the bottom with a small
screwdriver (not included).
Remove the orange battery tab from the push
button (B).
Description
Doorbell
Push button
NOTE: Sync/Reset button (2). See Troubleshooting for
additional information.
4
A
B
Quantity
1
1
2
A
1
B