HAMPTON BAY HB-7738-03 Guía De Uso Y Cuidado página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation (continued)
Testing the doorbell and push
3
button placement
Temporarily position the push button (B) and
doorbell (A) where they will be mounted.
Press the push button (B) to verify the
doorbell (A) and push button (B) work properly.
If the doorbell (A) does not sound, move the
doorbell (A) closer to the push button (B) and
test again.
NOTE: Do not permanently mount the push button (B) or
doorbell (A) until they are working properly.
4
Mounting the push button
Use either screws (AA) or double-sided tape (DD) to
mount the push button (B).
To mount with screws (AA), remove the back
of the push button (B) by pushing in the tab
on the bottom with a small screwdriver. Place
the push button back on the door jamb and
mark the two screw holes. Drill two 1/16 in.
(1.5 mm) pilot holes. Attach with screws (AA).
When attaching the push button (B) with
double-sided tape (DD), remove the paper from
both sides of the double-sided tape (DD) and
apply to a clean surface.
Snap on the front of the push button (B).
5
Mounting the doorbell
Determine mounting location.
Drill one 7/32 in. (5.5 mm) pilot hole and insert
a wall anchor (CC).
Insert the screw (BB) into the wall anchor (CC)
leaving about 1/8 in. (3.2 mm) of the screw
threads exposed.
Using the keyhole on the doorbell back
plate (1), hang the back plate (1) on the
screw (BB).
Mark the second screw location in the slot in
the doorbell back plate (1). Remove the back
plate (1) from the keyhole screw (BB).
Drill one 7/32 in. (5.5 mm) pilot hole and insert
a wall anchor (CC).
NOTE: The push button and doorbell come synced from
the factory. The range of the wireless doorbell can vary
with location, temperature, and battery condition.
B
NOTE: Remove material in screw holes (if needed) before
mounting with screws.
AA
Hang the doorbell back plate (1) on the keyhole
screw (BB) and insert the second screw (BB)
into the second wall anchor (CC).
Ensure the doorbell back plate (1) is level and
tighten the second screw (BB) securely.
CC
BB
5
Please contact 1-844-760-3644 for further assistance.
A
1
HAMPTONBAY.com

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

1003008633

Tabla de contenido