Tools Recommended For Installation - Fellowes AeraMax Pro AM II Manual Del Usuario

Ocultar thumbs Ver también para AeraMax Pro AM II:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
The air purifier continuously works in automatic mode; The air purifier will operate through the 5 levels of speeds in order to clean room of contaminents.
Once air is cleaned, and no sensors are activated, the unit lowers to energy saving mode to reduce energy consumption and extend the life of the filters.
When Manual Mode is selected the Manual indicator on the control panel will be blue. This mode allows you to choose one of the 5 fan speeds and keep
unit at this speed until Auto Mode is chosen/selected.
INSTALLATION
Please read instructions carefully before installing unit.
SAFETY
WARNING:
Be mindful of placement in relation to electric socket (cord length approx 5'5").
To avoid the risk of electrocution confirm the electrical supply has been disconnected or switched off before beginning any installation work.
Confirm no electrical wiring, utility pipes, or duct work is located directly behind the installation / drilling area.
It is strongly recommended at least 2 mounting points for the air purifier be mounted to an existing stud. Requires 2 people for installation.

TOOLS RECOMMENDED FOR INSTALLATION

• Electric drill, drill bits (not included)
• # 2 Phillips and # 2 Flat Head screw drivers (not included)
• Level (not included)
• Stud finder
PRODUCT INSTALLATION GUIDELINES
If air purifier is being mounted high on the wall make sure the top edge of the unit is positioned at least 8" inches (21 cm) below the ceiling to allow
for filter replacement.
Americans with Disabilities Act (ADA):
Be sure to follow all ADA guidelines pertaining to "Objects protruding into a circulation path." For more information visit www.ada.gov.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido