Assembling Your Breville Juice Fountain - Breville Juice Fountain Instrucciones De Uso Y Libro De Recetas

ASSEMBLING YOUR BREVILLE JUICE FOUNTAIN

Step 1.
Place Filter Bowl Surround on top of the
Motor Base.
Fig 1.
Step 2.
Sit the Stainless Steel Filter Basket inside
the Filter Bowl Surround.
Before switching the juicer on
ensure the stainless steel
filter basket is pushed down
firmly until it clicks into place.
Fig 2A.
Fig 2B.
Step 3.
Place the Juicer Cover over the Filter Bowl
Surround, positioning the Feed Chute over
the Stainless Steel Filter Basket and lower
into position.
Fig 3.
ASSEMBLING YOUR BREVILLE JUICE FOUNTAIN cont'd
Step 4.
Raise the Safety Locking Arm up into the
vertical operating position. (Please see 4A.)
Next locate the Locking Arm into the two
grooves on either side of the Juice Cover.
(Please see 4B.)
Step 5.
Slide the Food Pusher down the Feed chute
by aligning the groove in the Food Pusher
with the small protusion on the inside of the
top of the Feed Tube. (Please see 5A.)
8
Fig 4A.
Fig 4B.
Fig 5A.
FOOD PUSHER
GROVE
SMALL
PROTRUSION
INSIDE FEED
TUBE
9