Vetus WSD833 Instrucciones De Instalación página 6

Installation
Meters
For dimensions see drawing at page 16.
Using the template provided, cut out openings in
the instrument panel or bulkhead. Attach each
meter using the 4 threaded rods and nuts provid-
ed. Ensure that the seal sits correctly between the
meters and the panel or bulkhead.
Wind sensor
For dimensions see drawing at page 16.
The wind sensor should be fitted in a position unshielded from the wind and away from
any possible source of eddies which could give misleading readings. On a sailing boat
the mast head is the best position. If this is not practical, or on a vessel without a mast,
the unit should be located as high as possible in a position fully exposed to the wind.
Mount the base of the wind sensor to a horizontal
surface (e.g. horizontal with the ship in his normal
position).
Feed the cable of the wind sensor through the
base.
Select for the wind sensor a position at least 1
metre away from a VHF antenna.
4
10.0308
Wind speed/ wind direction indicator WSD833