CLEANING AND MAINTENANCE
Opening and cleaning the panel
• Push the panel first and then pull it to open.
• Clean the outside and inside with a damp cloth and a neutral detergent. Do not use
wet clothes, sponges, running water, pressure washers or abrasive cleaners.
Cleaning the grease filters
• The filters must be cleaned every 2 months of
operation, or more frequently for particularly
heavy usage, and can be washed in a
dishwasher.
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them
towards the back side of the hood unit and
simultaneously pulling downwards.
• Any kind of bending of the filters has to be
avoided when washing them. Before fitting
them again into the hood make sure that they are completely dry. (The color of the
filter surface may change throughout the time but this has no influence to the filter
efficiency).
• When fitting the filters into the hood pay attention that they are mounted in correct
position the handle facing outwards.
• Close the comfort panel.
Activated charcoal filters (recirculation version)
• These filters are not washable and cannot be regenerated, and must be replaced
approximately every 4 months of operation, or more frequently with heavy usage.
EN
39