Rear Panel - Tangent DAB2go Manual Del Usuario

Rear panel

1. 12V/1.2A: Use this input to connect the radio's DC power supply.
2. HEADPHONE: Inserting a headset plug will turn off the internal speaker. The output for
the headset is controlled by the volume knob.
3. RECORD OUT: The radio can be used as a tuner by connecting it to an amplifier.
4. AUX IN: Connect any stereo or mono audio source to this stereo input.
5. USB CHARGE: Designed for charging USB devices including iPods.
6. BATTERY COMPARTMENT: Loosen the big screw on the right side of the battery lit
using e.g. a coin. Install 6 pcs AA sized batteries in the compartment.
Note: remember to install the battery correctly in the compartment. The negative end
(-) of the battery must be placed with the end of the battery compartment with a spring.
The positive end (+) of the battery must be placed with the end of the battery
compartment without a spring.
6