To Manually Set Clock; Alarm; To Set Alarm; To Activate / Deactivate Alarm - Oregon Scientific WMH601 Manual De Usuario

TO MANUALLY SET CLOCK

1. Press and hold MODE.
2. Press UP or Down to change setting options. The
settings order is: country, city, display contrast, +/-1
time zone, 12/24 hour format, hour, minute, year,
month-day / day-month, month, day and language.
3. Press MODE to confirm.
NOTE The language options are English (ENG), German
(DEU), French (FRA), Italian (ITA) and Spanish (ESP).
NOTE If the clock signal reception is strong, you are
unable to manually set the time.

ALARM

TO SET ALARM

1. Press ALARM to enter Alarm mode.
in Alarm mode.
2. Press and hold ALARM to enter settings.
3. Press UP or Down to set hour and minute.
4. Press ALARM to confirm.
5. Press MODE to return to clock display.

TO ACTIVATE / DEACTIVATE ALARM

1. Press ALARM to enter Alarm mode.
in Alarm mode.
2. Press ALARM repeatedly to activate or deactivate
alarm.
3. Press MODE to confirm and return to clock display.

TO SILENCE ALARM

• Press SNOOZE / LIGHT to snooze alarm for 8 minutes.
OR
• Press any key to turn the alarm off and activate it
again after 24 hours.

DISPLAY CONTRAST

You can adjust the clarity level of the display. Press and
hold MODE until "CONTR" is shown, then select from
0 (lowest) to 15 (highest) by pressing UP or Down for
your preferred level of display contrast. Press MODE
indicates to confirm.

BACKLIGHT

Press SNOOZE / LIGHT to activate LED backlight for
8 seconds.

RESET

Press RESET to return to the default settings.
indicates
8
indicates alarm is On.