Tilt Bracket Assembly With Band Clamps - Cambium Networks PTP 670 Serie Guia De Inicio Rapido

1
3

Tilt Bracket Assembly with band clamps

Follow Step 1 for the Tilt Bracket Assembly procedure above.
Feed the band clamps (not supplied by Cambium) through the slots in the bracket body. Secure the bracket
body to the pole using band clamps, ensuring that the arrow in the body is pointing upwards. Adjust the
azimuth angle, and tighten the band clamps to a torque setting of 6.0 Nm (4.5 lb ft).
Hoist the ODU to the mounting position. Fix the mounting plate to the bracket body with four of the short
bolts, using a 13 mm spanner or socket. Adjust the elevation angle, and tighten the bolts to a torque setting
of 8.0 Nm (5.9 lb ft).
5
2
PAGE 18
2
4
3
PTP 670 QUICK START GUIDE