Snooze Function; Display Change; Clima Indicator; Weather Forecast - National Geographic VA Manual De Instrucciones

9. While the alarm is displayed, press the ALARM button to enable or disable the alarm.

13 Snooze function

1. When the alarm sounds, press the SNOOZE/LIGHT button to activate the snooze function. The
alarm sounds again after 5 minutes.
2. When the alarm sounds, press any other key to stop the alarm until the set alarm time is reached
again.
3. If no key is pressed, the alarm is automatically switched off after 2 minutes.

14 Display change

• In normal display mode, press the DOWN button to toggle the time display between 12-hour or 24-
hour mode.
• In normal display mode, press the SET button to switch between time and date.
• In normal display mode, press the UP button to toggle between °C and °F when displaying the
temperature unit.
• In normal display mode, press the CHANNEL button for about 3 seconds to clear the outdoor
sensor data and reinitialize sensor reception.
• In normal display mode, press the MEM button several times to display the set Max/Min values
one after another.
• During the Max/Min display, press the MEM button for about 3 seconds to clear the Max/Min data.
Every day at 0:00 a.m. the max/min data record is automatically deleted.
• In normal display mode, press the ALARM button to display the currently set alarm time.

15 Clima indicator

1 DRY: dry (humidity <40%)
3 WET: Humid (humidity >70%)
The climate indicator is a visual display based on air temperature and humidity to determine the level
of comfort.
Note:
• The comfort display may vary at the same temperature, depending on the humidity.
• There is no comfort display if the temperature is below 0°C or above 60°C.

16 Weather forecast

The weather forecast is calibrated according to the air pressure and displayed with 5 status symbols:
sunny, partly cloudy, cloudy, rainy and snowy.
22 / 52
2 COMFORT: Optimal (humidity between 40%
and 70%)