Publicidad
Idiomas disponibles
Idiomas disponibles
6
Attach the top (C) to the left and right panel (A&B) and tighten the cam locks.
Hammer two tack glides (10) into the bottom edge of each panel (A&B) as shown.
x4
10
x4
all finished edges and surfaces are facing upwards
todos los bordes y superficies acabadas estén mirando hacia arriba
LOCK
APRETAR
C
A
11 /19
The bottom edge of the kick (E)
must be flush with the bottom edge
of panels (A&B). If it is not flush,
loosen the screws fastening the
angle brackets to the kick (E),
adjust as necessary, then retighten
the screws.
B
E
D
10
B345985333W0 0
Publicidad
